3D-Printing on Ian's Projects

30-pin SIMM Extender

Mon, 01 Jan 0001 00:00:00 +0000

Details

A simple extender which makes the length of 30pin SIMMS the same as a 72pin SIMM. Clearly, this won’t make 30pin SIMMs work as a 72pin SIMM, but I created it so I could mix 72 and 30pin SIMMs in the same tray.

There’s a couple of standard heights already available as STLs, but the model is very configurable if you need something else.

BBC Micro Screw Clip

Mon, 01 Jan 0001 00:00:00 +0000

Details

This is a replacement rear screw clip for the BBC Micro. The screw hole is larger on one side than other, with the large hole facing outwards from the case. The smaller hole is intended for the screw to bite on the first time it’s inserted. Do not be tempted to over-tighten as it won’t be as strong as the original metal clip.

Drain Cover

Mon, 01 Jan 0001 00:00:00 +0000

Details

This is a cover for an Overflow Relief Gully, which essentially protects your house if the sewage system is over capacity. It’s designed at a standard 14cm diameter.

Funnels Galore

Mon, 01 Jan 0001 00:00:00 +0000

Details

This design is parametric, which essentially means the dimensions are not hard coded into the model, but can be specified via parameters. This allows you create many different kinds of designs from basically the same model. The variables are described in the table below. If you want to create your own funnel, you will need to create yourself a free OnShape account and then simply copy the workspace. The variables are on the left handside and are prefixed with (x).

Furniture Shelf Pin

Mon, 01 Jan 0001 00:00:00 +0000

Details

This is a replacement shelf pin, common with flat-pack type furniture.

It is intended to add stability to a shelf that might be missing a pin, rather than being truly load bearing so I recommend using it, in addition to mostly metal pins as it obviously will not be as strong.

Game Console Controller Wallmounts

Mon, 01 Jan 0001 00:00:00 +0000

Home Made Controller Wallmount

Details

This wallmount is actually for a 100% homebuilt game controller that is compatible with the common Atari 9-pin joystick format of the 80s and 90s. In other words many Commodore, Atari, SEGA, Sinclair, MSX etc systems of the era. I’ve posted the links below for the PCB and Case if you want to try this yourself.

Game Console Vertical Stands

Mon, 01 Jan 0001 00:00:00 +0000

Atari 2600 Jnr Vertical Stand

Details

A vertical stand for the Atari 2600 Junior.

Core Grafx / PC Engine Vertical Stand

Details

A vertical stand for the Core Grafx, which is probably also compatible with the Core Grafx II and the standard PC Engine. The height is raised so that it should be possible to actually use the console in the vertical position when the power connector is attached.

Generic 3.5" Faceplate

Mon, 01 Jan 0001 00:00:00 +0000

Details

This is just another generic 3.5" faceplate which happens to fit a computer case that I needed it for and it may or may not work with yours.

I/O Shields

Mon, 01 Jan 0001 00:00:00 +0000

I/O Shield for AT Computers (eg 386/486 era systems)

Details

An I/O Shield for AT or Baby AT sized systems which usually just have a single onboard connector for an AT keyboard. These are generally 386 / 486 era systems

I/O Shield - Blank

Details

A blank I/O shield. Use it as a filler or modify it to fit a specific motherboard.

IBM 5150 Round Port Cap

Mon, 01 Jan 0001 00:00:00 +0000

Details

This is a “cap” for the round port which sits above the keyboard and cassette ports on an IBM 5150 (any maybe other contemporary models).

The original is a metal cap (which I have) but I wanted to use that empty port to mount two external switches for use with my PC Sprint Accelerator. One is a 6x6mm tactile momentary switch which is a reset button and the other is a square push button toggle switch to change between normal and turbo mode.

IC Tube

Mon, 01 Jan 0001 00:00:00 +0000

Details

This is an IC tube for wider format DIP chips. The tube is windowed so that the values can be read on the ICs.

Necroware PS/2 to Serial Adapter Case

Mon, 01 Jan 0001 00:00:00 +0000

Details

This is a case I designed for the PS/2 to Serial Mouse Adapter by Necroware. There’s two slightly different versions of the STL for the case. One includes window supports which should be removed after printing and the other does not.

Oric Motherboard Mounting Panel

Mon, 01 Jan 0001 00:00:00 +0000

Details

Designed for a replica Oric motherboard it will also fit a normal Oric-1 or Oric Atmos motherboard. It’s useful when you don’t have a case. Use 5 x 3.5mm self tapping screws and optional rubber feet on the base.

Tape64 V2 Case

Mon, 01 Jan 0001 00:00:00 +0000

Details

A case for the Tape64 V2 device for the Commodore 64, which emulates a datacorder. You don’t need to print the PCB STL file, it was only used as a reference. As it’s possible to assemble this PCB slightly differently, you’ll need to ensure the edge connector is aligned with the PCB in the same manner as shown in the STL file.

The aeroPLAne

Mon, 01 Jan 0001 00:00:00 +0000

Details

This design is parametric, which essentially means the dimensions are not hard coded into the model, but can be specified via parameters. This allows you create many different kinds of designs from basically the same model. If you want to create your own aeroPLAne, you will need to create yourself a free OnShape account and then simply copy the workspace. The variables are on the left handside and are prefixed with (x).

Westinghouse Stove Knob

Mon, 01 Jan 0001 00:00:00 +0000

Details

This is a replacement knob for stove or cooker tops. This particular one was designed for a estinghouse gas stove top but may be compatible with others.

ZX Spectrum Cartridge Case

Mon, 01 Jan 0001 00:00:00 +0000

Details

This is a cartridge case, specifically built for the spectrum cartridge designed by ‘Skoti - Poland’.

3D-Printing on Ian's Projects

30-pin SIMM Extender

Links

Details

BBC Micro Screw Clip

Links

Details

Drain Cover

Links

Details

Funnels Galore

Links

Details

Furniture Shelf Pin

Links

Details

Game Console Controller Wallmounts

Home Made Controller Wallmount

Links

Details

Game Console Vertical Stands

Atari 2600 Jnr Vertical Stand

Links

Details

Core Grafx / PC Engine Vertical Stand

Links

Details

Generic 3.5" Faceplate

Links

Details

I/O Shields

I/O Shield for AT Computers (eg 386/486 era systems)

Links

Details

I/O Shield - Blank

Links

Details

IBM 5150 Round Port Cap

Links

Details

IC Tube

Links

Details

Necroware PS/2 to Serial Adapter Case

Links

Details

Oric Motherboard Mounting Panel

Links

Details

Tape64 V2 Case

Links

Details

The aeroPLAne

Links

Details

Westinghouse Stove Knob

Links

Details

ZX Spectrum Cartridge Case

Links

Details